JayCee Enterprises

3100 W. Harvard St. #3
Santa Ana, CA 92704
ph: 714-444-4344
fax: 714-444-4644
dragracevw@msn.com

PRODUCTS

Billet Crank Trigger Distributor $280.00

JayCee's Billet Crank Trigger Distributor is made from solid 6061t-6 aluminum and anodized for a professional finish.
This distributor uses two roller bearings, a steel rotor shaft and shaft seal for high RPM with no failures. A non-resistor rotor to help deliver that HOT ignition spark. With the larger 2 piece cap, cross fire is eliminated and the low profile allows clearance for all over the top headers.
#8 Fuel Pump Block Off $24.95
JayCee's Billet one piece block off is the first of its kind. Manufactured with a tapered hole for max breathing. Anodized in Red, Black or Blue.
Universal Oil Return $24.95
Universal oil return's for Power Flow Systems, Turbo Drain Backs, Bypass Systems ect... Available in #8 & #10
Comes in Silver, Red, Black & Blue
JayCee Filter Bracket $19.95
Oil filter bracket. Fits our billet manifold or bypass system. Mounts to the #4 exhaust studs.
JayCee Universal Billet Coil Clamp $28.95

JayCee's New Billet Coil Clamp is made from 6061 billet aluminum and fits the Bosch or MSD coils. This universal clamp mounts to the fan shroud, firewall or any easy assessable area you can drill two holes. JayCee's coil clamp includes all hardware for a simple installation. So take pride in your ride and get a made in the USA product that will last as long as your car does! Available in Red, Black or Blue
JAYCEE Dual Billet Coil Clamp $48.95
JayCee's new dual coil clamp is a must for the off road cars. made of 6061 Billet Aluminum. Come in Silver, Red, Blue and Black
Billet Spring Plate Retainers $189.00

JayCee billet spring plate retainers eliminate any tow in on the hard drag race launch and helps keep the suspension stable at high speeds. The JayCee retainers are CNC machined from 6061 aluminum then polished for a high luster finish. After polishing they are anodized and the JayCee logo lazered in. The final touch is a CNC machined bronze bearing bushing installed. All machined in the USA in our competence. Available in red, black, or blue.
JayCee Tapered Ring Compressor $48.95

JayCee Tapered Ring Compressor. This tool installs the piston in the cylinder in seconds. Just slide through the piston (rings installed) and put the tapered ring compressor onto the top of your cylinder. Also eliminates any rings from over-lapping. Available in 85.5, 87, 90.5, 92 & 94 mm larger sizes available upon request. See a demonstration video here.
Billet Breather Stand $59.95

The Original JayCee Billet breather stand is made of 6061 T6 aluminum. This product is anodized for a long lasting finish in Red, Black or Blue and is 100% machined, not welded! The breather stand delivers a dual purpose! Easy to fill oil and a breather mount with a 3/8 NPT hole in the backside if requested at no charge! Along with the JayCee laser engraved logo on the oil cap a o-ring insures a leak proof product.
JayCee Billet oil manifold $79.00

Our new and improved billet filter manifold has been upgraded with our ultra high flow machining process to direct oil around the whole filter screen using a tapered inlet and has been put on a diet by removing excess material internally while still keeping the attractive design!
Manufactured in house using 6061 billet aluminum and anodized for a long lasting finish! Available in red, black, blue or silver. Also includes a pair JayCee high flow #8 aluminum fitting with o-rings to make installation easy!
We also carry a line of billet filter and brackets to mount your manifold to you street strip or off-road racer!
JayCee Oil Control System $139.95

Check out our new oil control system! We have eliminated the large brass bypass valve and machined it internally into our 6061 billet aluminum oil manifold housing. The systems are all calibrated to 80psi and includes a high flow relief piston, double ground precision spring and complemented with the black anodized #8 an fittings. The housing comes in blue, black or red anodized color for a long lasting professional finish!
JayCee Billet filters $89.95

JayCee’s billet filter. Filters 100% of the oil, with no internal relief like other filters. It replaces the HP1 or the PH8A. This filter is 100% washable and will be the last filter you will have to buy! Anodize black for easy debris identification and laser engraved JayCee logo to insure you are getting a genuine JayCee Product!
JayCee Full Flow Extension Adapter $24.00

JayCee has there new full flow extension adapter for the main oil galley in stock. This allows the racer to put the oil pressure to the mains and not the oil cooler side. A direct shot of pressure means less chance of bearing starvation and longer bearing life. Check out the VW case cut a way that shows the installation and oil passage that is a direct shot!. This fitting is a fine compliment to the JayCee Bypass system also.
Fuel Pump Block off W/ Breather $24.95

JayCee Billet fuel pump block off with breather hole. Made of 6061 aluminum then anodized for a professional finish. The breather hole is mounted on the back side with a 3/8 NPT hole for easy fitting installation and includes allen hardware.
Available in red, blue, and black .
JayCee Billet Mag Clamps $119.95

JayCee Billet mag clamp eliminates egg shaping the distributor drive hole on hard launches. Fits the Vertex/ Joe Hunt/Don Zig Magnitos. Anodized for a long lasting finish, these clamps mount to your fuel pump base. The clamp features a 3/8 pipe hole for turbo drain back or breather $119.95
Available in red, black, blue or silver!
JayCee Valve Cover Studs $58.00

JayCee's extended valve cover nuts are designed for the "Component Development" heads. These nuts make the installation and removal of the valve covers a breeze. No more "hard to get to" or losing the 10/32 nut in the gravel. Anodized in Red, Blue or Black for that professional look.
JayCee / RLR billet front disk brakes $980.00
Ron Lummus and Jack Sacchette with over 40 years combined championship experience have teamed up to create a new line of products called . L S performance.
Realizing the need in the industry for years, L S Performance will be dedicated to the manufacture, distribution and support of . PRODUCTS THAT WORK, SUPPORT THAT YOU CAN COUNT ON, DESIGNS THAT WILL ALWAYS BE THE BENCHMARK FOR THE VW INDUSTRY.
LS Performance is proud to introduce there newest
Performance product. The lightweight billet aluminum
Chevy disk brakes for the early K&L and the late
Ball joint front end. These brakes like our Chevy rear
kits are strong yet lightweight. Made of 7075 billet
aluminum. Engineered for stock or dropped spindles
all kits include bearings, races , seals, studs, billet
spindle nuts and chrome dust caps.
Maximum inset of the brake hub insures wheel offsets
the same as spindle mounts.
JayCee / RLR Billet rear disk brakes $980.00

LS Performance rear disk brakes are made of 7075 billet aluminum making them strong yet lightweight. With a rotating mass of 6.2 lbs (including the hubs, rotors and studs) helping turn your $$$ investment into a better performance. By using Chevy bolt pattern of 5 on 4 3/4 this allows you more of a selection of wheel styles.
The kit includes everything to install except brake fluid!
Yes the brakes are in stock and ready for delivery!